Ae 100
Research in Aerospace
Units to be arranged in accordance with work accomplished
Open to suitably qualified undergraduates and first-year graduate students under the direction of the staff. Credit is based on the satisfactory completion of a substantive research report, which must be approved by the Ae 100 adviser and by the option representative.
Ae/APh/CE/ME 101 abc
Fluid Mechanics
9 units (3-0-6)
|
first, second, third terms
Prerequisites: APh 17 or ME 18, and ME 19 or equivalent, ACM 95/100 or equivalent (may be taken concurrently).
Fundamentals of fluid mechanics. Microscopic and macroscopic properties of liquids and gases; the continuum hypothesis; review of thermodynamics; general equations of motion; kinematics; stresses; constitutive relations; vorticity, circulation; Bernoulli's equation; potential flow; thin-airfoil theory; surface gravity waves; buoyancy-driven flows; rotating flows; viscous creeping flow; viscous boundary layers; introduction to stability and turbulence; quasi one-dimensional compressible flow; shock waves; unsteady compressible flow; and acoustics.
Instructors:
Colonius, Dimotakis
Ae/AM/CE/ME 102 abc
Mechanics of Structures and Solids
9 units (3-0-6)
|
first, second, third terms
Prerequisites: ME 35 abc or equivalent.
Static and dynamic stress analysis. Two- and three-dimensional theory of stressed elastic solids. Analysis of structural elements with applications in a variety of fields. Variational theorems and approximate solutions, finite elements. A variety of special topics will be discussed in the third term such as, but not limited to, elastic stability, wave propagation, and introductory fracture mechanics.
Instructor:
Ortiz
Ae/APh 104 abc
Experimental Methods
9 units (3-0-6) first term
|
(0-6-3) second, third terms
Prerequisites: ACM 95/100 abc or equivalent (may be taken concurrently), Ae/APh/CE/ME 101 abc or equivalent (may be taken concurrently).
Lectures on experiment design and implementation. Measurement methods, transducer fundamentals, instrumentation, optical systems, signal processing, noise theory, analog and digital electronic fundamentals, with data acquisition and processing systems. Experiments (second and third terms) in solid and fluid mechanics with emphasis on current research methods.
Instructor:
McKeon
Ae 105 abc
Aerospace Engineering
9 units (3-0-6)
|
first, second, third terms
Prerequisites: APh 17 or ME 18 and ME 19 or equivalent.
Part a: Introduction to spacecraft systems and subsystems, mission design, fundamentals of orbital and rocket mechanics, launch vehicles and space environments; JPL-assisted design exercise; spacecraft mechanical, structural, and thermal design; numerical modeling, test validation. Part b: Introduction to guidance, navigation, and control (GNC), measurement systems, Kalman filtering, system analysis, simulation, statistical error analysis, case studies of JPL GNC applications; preliminary discussion and setup for team project leading to system requirements review. Part c: Team project leading to preliminary design review and critical design review.
Instructors:
Pellegrino, Davis, Scharf
CE/Ae/AM 108 ab
Computational Mechanics
9 units (3-0-6); first, second terms
|
Prerequisite:Ae/AM/ME/CE 102abc or Ae/GE/ME 160ab, or instructor's permission
Numerical methods and techniques for solving initial boundary value problems in continuum mechanics (from heat conduction to statics and dynamics of solids and structures). Finite difference methods, direct methods, variational methods, finite elements in small strains and at finite deformation for applications in structural mechanics and solid mechanics. Solution of the partial differential equations of heat transfer, solid and structural mechanics, and fluid mechanics. Transient and nonlinear problems. Computational aspects and development and use of finite element code. Not offered 2013-2014.
Ae 115 ab
Spacecraft Navigation
9 units (3-0-6)
|
first, second terms
Prerequisites: CDS 110 a.
This course will survey all aspects of modern spacecraft navigation, including astrodynamics, tracking systems for both low-Earth and deep-space applications (including the Global Positioning System and the Deep Space Network observables), and the statistical orbit determination problem (in both the batch and sequential Kalman filter implementations). The course will describe some of the scientific applications directly derived from precision orbital knowledge, such as planetary gravity field and topography modeling. Numerous examples drawn from actual missions as navigated at JPL will be discussed. Not offered 2013-14.
APh/Ph/Ae 116
Physics of Thermal and Mass Transport in Hydrodynamic Systems
12 units (3-0-9)
|
second term
Prerequisites: ACM 95 or equivalent and APh/Ph 115 or equivalent.
Contemporary research in many areas of physics requires some knowledge of how momentum transport in fluids couples to diffusive phenomena driven by thermal or concentration gradients. This course will first examine processes driven purely by diffusion and progress toward description of systems governed by steady and unsteady convection-diffusion and reaction-diffusion. Topics will include Fickian dynamics, thermal transfer in Peltier devices, Lifshitz-Slyozov growth during phase separation, thermocouple measurements of oscillatory fields, reaction-diffusion phenomena in biophysical systems, buoyancy driven flows, and boundary layer formation. Students must have working knowledge of vector calculus, ODEs, PDEs, complex variables and basic tensor analysis. Advanced solution methods such as singular perturbation, Sturm-Liouville and Green's function analysis will be taught in class as needed. First term is APh/Ph 115.
Instructor:
Troian
Ae/ME 120 ab
Combustion Fundamentals
9 units (3-0-6)
|
second, third terms
Prerequisites: ME 119 a or equivalent.
The course will cover thermodynamics of pure substances and mixtures, equations of state, chemical equilibrium, chemical kinetics, combustion chemistry, transport phenomena, and the governing equations for multicomponent gas mixtures. Topics will be chosen from non-premixed and premixed flames, the fluid mechanics of laminar flames, flame mechanisms of combustion-generated pollutants, and numerical simulations of multicomponent reacting flows. Not offered 2013-14.
Ae 121 abc
Space Propulsion
9 units (3-0-6); each term
|
Open to all graduate students and to seniors with instructor's permission
Modern aspects of rocket, electrical, and nuclear propulsion systems and the principles of their application to lifting, ballistic, and spaceflight trajectories. Combustion and burning characteristics of solid and liquid propellants, liquid-propellant fuel systems, and combustion instability. Fundamentals of electric propulsion including ion thrusters, MHD, Hall effect, and arcjets. Introduction to spacecraft station-keeping, stability, and control.
Instructor:
Polk
Ae 150 abc
Aerospace Engineering Seminar
1 unit
|
first, second, third terms
Speakers from campus and outside research and manufacturing organizations discuss current problems and advances in aerospace engineering. Graded pass/fail.
Instructor:
McKeon
EE/Ae 157 ab
Introduction to the Physics of Remote Sensing
9 units (3-0-6)
|
first, second terms
Prerequisites: Ph 2 or equivalent.
An overview of the physics behind space remote sensing instruments. Topics include the interaction of electromagnetic waves with natural surfaces, including scattering of microwaves, microwave and thermal emission from atmospheres and surfaces, and spectral reflection from natural surfaces and atmospheres in the near-infrared and visible regions of the spectrum. The class also discusses the design of modern space sensors and associated technology, including sensor design, new observation techniques, ongoing developments, and data interpretation. Examples of applications and instrumentation in geology, planetology, oceanography, astronomy, and atmospheric research.
Instructor:
van Zyl
Ae 159
Space Optical System Engineering
9 units (3-0-6)
|
third term
Prerequisites: Ph 2, EE/Ae 157, or equivalent; APh 23 desirable.
Introduction to optical system engineering for remote sensing from space will be presented. End-to-end optical systems are discussed within the framework of the 10 scientific/technical disciplines required to build a successful system: optical engineering, physical optics of materials, solid-state physics/detectors, mechanics and mechanisms engineering, wavefront sensing and control, structures and dynamics, thermal engineering, spacecraft engineering, psychology of vision and software processing of images, and end-to-end system validation and calibration. Emphasis will be on the development of optical engineering tools.
Instructor:
Breckenridge
Ae/Ge/ME 160 ab
Continuum Mechanics of Fluids and Solids
9 units (3-0-6)
|
first, second terms
Elements of Cartesian tensors. Configurations and motions of a body. Kinematics-study of deformations, rotations and stretches, polar decomposition. Lagrangian and Eulerian strain velocity and spin tensor fields. Irrotational motions, rigid motions. Kinetics-balance laws. Linear and angular momentum, force, traction stress. Cauchy's theorem, properties of Cauchy's stress. Equations of motion, equilibrium equations. Power theorem, nominal (Piola-Kirchoff) stress. Thermodynamics of bodies. Internal energy, heat flux, heat supply. Laws of thermodynamics, notions of entropy, absolute temperature. Entropy inequality (Clausius-Duhem). Examples of special classes of constitutive laws for materials without memory. Objective rates, corotational, convected rates. Principles of materials frame indifference. Examples: the isotropic Navier-Stokes fluid, the isotropic thermoelastic solid. Basics of finite differences, finite elements, and boundary integral methods, and their applications to continuum mechanics problems illustrating a variety of classes of constitutive laws.
Instructor:
Kochmann
Ae/CE 165 ab
Mechanics of Composite Materials and Structures
9 units (2-2-5)
|
second, third terms
Prerequisites: Ae/AM/CE/ME 102 a or ME 65.
Introduction and fabrication technology, elastic deformation of composites, stiffness bounds, on- and off-axis elastic constants for a lamina, elastic deformation of multidirectional laminates (lamination theory, ABD matrix), effective hygrothermal properties, mechanisms of yield and failure for a laminate, strength of a single ply, failure models, splitting and delamination. Experimental methods for characterization and testing of composite materials. Design criteria, application of design methods to select a suitable laminate using composite design software, hand layup of a simple laminate and measurement of its stiffness and thermoelastic coefficients.
Instructor:
Pellegrino
Ae 200
Advanced Research in Aerospace
Units to be arranged
Ae.E. or Ph.D. thesis level research under the direction of the staff. A written research report must be submitted during finals week each term.
Ae 201 ab
Advanced Fluid Mechanics
9 units (3-0-6)
|
first, second terms
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent; AM 125 abc or ACM 101 (may be taken concurrently).
Foundations of the mechanics of real fluids. Basic concepts will be emphasized. Subjects covered will include a selection from the following topics: physical properties of real gases; the equations of motion of viscous and inviscid fluids; the dynamical significance of vorticity; vortex dynamics; exact solutions; motion at high Reynolds numbers; hydrodynamic stability; boundary layers; flow past bodies; compressible flow; subsonic, transonic, and supersonic flow; shock waves.
Instructors:
Pullin, Meiron
Ae 204 ab
Technical Fluid Mechanics
9 units (3-0-6)
|
second, third terms
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent.
External and internal flow problems encountered in engineering, for which only empirical methods exist. Turbulent shear flow, separation, transition, three-dimensional and nonsteady effects. Basis of engineering practice in the design of devices such as mixers, ejectors, diffusers, and control valves. Studies of flow-induced oscillations, wind effects on structures, vehicle aerodynamics. Not offered 2013-14.
Ae 205 ab
Advanced Space Project
9 units (2-4-3)
|
second, third terms
Prerequisites: Ae105 abc.
This is an advanced course on the design and implementation of space projects and it is currently focused on the flight project Autonomous Assembly of a Reconfigurable Space Telescope (AAReST). The objective is to be ready for launch and operation in 2015. Each student will be responsible for a specific activity, chosen from the following: optimization of telescope system architecture; design, assembly and testing of telescope optics; telescope calibration procedure and algorithms for wavefront control; thermal analysis; boom design and deployment test methods; effects of spacecraft dynamics on telescope performance; environmental testing of telescope system. Each student will prepare a survey of the state of the art for the selected activity, and then develop a design/implementation plan, execute the plan and present the results in a final report.
Instructor:
Pellegrino
Ae 208 abc
GALCIT Colloquium
1 unit
|
first, second, third terms
A seminar course in fluid, solid, space, and bio mechanics. Weekly lectures on current developments are presented by staff members, graduate students, and visiting scientists and engineers. Graded pass/fail.
Instructors:
Dabiri, Kochman
Ae/AM/MS/ME 213
Mechanics and Materials Aspects of Fracture
9 units (3-0-6)
|
first term
Prerequisites: Ae/AM/CE/ME 102 abc (concurrently) or equivalent and instructor's permission.
Analytical and experimental techniques in the study of fracture in metallic and nonmetallic solids. Mechanics of brittle and ductile fracture; connections between the continuum descriptions of fracture and micromechanisms. Discussion of elastic-plastic fracture analysis and fracture criteria. Special topics include fracture by cleavage, void growth, rate sensitivity, crack deflection and toughening mechanisms, as well as fracture of nontraditional materials. Fatigue crack growth and life prediction techniques will also be discussed. In addition, "dynamic" stress wave dominated, failure initiation growth and arrest phenomena will be covered. This will include traditional dynamic fracture considerations as well as discussions of failure by adiabatic shear localization.
Instructor:
Gdoutos
Ae/AM/CE/ME 214 abc
Computational Solid Mechanics
9 units (3-0-6)
|
first, second, third terms
Prerequisites: AM 125 abc or equivalent; ACM 100 abc or equivalent; CE/AM/Ae 108 abc or equivalent or instructor's permission; Ae/AM/CE/ME 102 abc or equivalent; Ae/Ge/ME 160 ab desirable or taken concurrently.
Introduction to the use of numerical methods in the solution of solid mechanics and materials problems. First term: geometrical representation of solids. Automatic meshing. Approximation theory. Interpolation error estimation. Optimal and adaptive meshing. Second term: variational principles in linear elasticity. Finite element analysis. Error estimation. Convergence. Singularities. Adaptive strategies. Constrained problems. Mixed methods. Stability and convergence. Variational problems in nonlinear elasticity. Consistent linearization. The Newton-Rahpson method. Bifurcation analysis. Adaptive strategies in nonlinear elasticity. Constrained finite deformation problems. Contact and friction. Third term: time integration. Algorithm analysis. Accuracy, stability, and convergence. Operator splitting and product formulas. Coupled problems. Impact and friction. Subcycling. Space-time methods. Inelastic solids. Constitutive updates. Stability and convergence. Consistent linearization. Applications to finite deformation viscoplasticity, viscoelasticity, and Lagrangian modeling of fluid flows. Not offered 2013-14.
Ae/AM/ME 215
Dynamic Behavior of Materials
9 units (3-0-6)
|
second term
Prerequisites: ACM 100 abc or AM 125 abc; Ae/AM/CE/ME 102 abc.
Fundamentals of theory of wave propagation; plane waves, wave guides, dispersion relations; dynamic plasticity, adiabatic shear banding; dynamic fracture; shock waves, equation of state.
Instructor:
Clifton
Ae 220
Theory of Structures
9 units (3-0-6)
|
first term
Prerequisites: Ae/AM/CE/ME 102 abc.
Fundamentals of buckling and stability, total potential energy and direct equilibrium approaches; classification of instabilities into snap-through type and bifurcation type; rigid-elastic structures, eigenvalues, and eigenvectors of stiffness matrix; elastic structures; approximate estimates of buckling load; Rayleigh quotient; lateral buckling of columns: Euler strut, imperfections, Southwell plot, beam-columns, stability coefficients, buckling of frames; elasto-plastic buckling: tangent-modulus, double-modulus, Shanley's analysis; lateral-torsional buckling of beams; buckling of plates; buckling of cylindrical shells. Not offered 2013-14.
Ae/CE 221
Space Structures
9 units (3-0-6)
|
second term
This course examines the links between form, geometric shape, and structural performance. It deals with different ways of breaking up a continuum, and how this affects global structural properties; structural concepts and preliminary design methods that are used in tension structures and deployable structures. Geometric foundations, polyhedra and tessellations, surfaces; space frames, examples of space frames, stiffness and structural efficiency of frames with different repeating units; sandwich plates; cable and membrane structures, form-finding, wrinkle-free pneumatic domes, balloons, tension-stabilized struts, tensegrity domes; deployable and adaptive structures, coiled rods and their applications, flexible shells, membranes, structural mechanisms, actuators, concepts for adaptive trusses and manipulators. Not offered 2013-14.
Ae/AM/ME 223
Plasticity
9 units (3-0-6)
|
first term
Prerequisites: Ae/AM/CE/ME 102 abc or instructor's permission.
Theory of dislocations in crystalline media. Characteristics of dislocations and their influence on the mechanical behavior in various crystal structures. Application of dislocation theory to single and polycrystal plasticity. Theory of the inelastic behavior of materials with negligible time effects. Experimental background for metals and fundamental postulates for plastic stress-strain relations. Variational principles for incremental elastic-plastic problems, uniqueness. Upper and lower bound theorems of limit analysis and shakedown. Slip line theory and applications. Additional topics may include soils, creep and rate-sensitive effects in metals, the thermodynamics of plastic deformation, and experimental methods in plasticity. Not offered 2013-14.
Ae/AM/ME 225
Special Topics in Solid Mechanics
Units to be arranged
|
first, second, third terms
Subject matter changes depending upon staff and student interest.
Ae 228
Computational Mechanics Simulations Using Particles
9 units (3-0-6)
|
second term
Prerequisites: Ae/AM/CE/ME 214 or equivalent or Ae/ACM/ME 232 or equivalent, ACM 104, ACM 105, or equivalent.
Particle simulations of continuum and discrete systems. Advances in molecular, mesoscopic, and macroscale simulations using particles, identification of common computing paradigms and challenges across disciplines, discretizations and representations using particles, fast summation algorithms, time integrators, constraints, and multiresolution. Exercises will draw on problems simulated using particles from diverse areas such as fluid and solid mechanics, computer graphics, and nanotechnology.
Instructor:
Koumoutsakos
Ae/ACM/ME 232 abc
Computational Fluid Dynamics
9 units (3-0-6)
|
first, second, third terms
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent; ACM 100 abc or equivalent.
Development and analysis of algorithms used in the solution of fluid mechanics problems. Numerical analysis of discretization schemes for partial differential equations including interpolation, integration, spatial discretization, systems of ordinary differential equations; stability, accuracy, aliasing, Gibbs and Runge phenomena, numerical dissipation and dispersion; boundary conditions. Survey of finite difference, finite element, finite volume and spectral approximations for the numerical solution of the incompressible and compressible Euler and Navier-Stokes equations, including shock-capturing methods. Not offered 2013-14.
Ae 233
Hydrodynamic Stability
9 units (3-0-6)
|
first, second term
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent.
Laminar-stability theory as a guide to laminar-turbulent transition. Rayleigh equation, instability criteria, and response to small inviscid disturbances. Discussion of Kelvin-Helmholtz, Rayleigh-Taylor, Richtmyer-Meshkov, and other instabilities, for example, in geophysical flows. The Orr-Sommerfeld equation, the dual role of viscosity, and boundary-layer stability. Modern concepts such as pseudomomentum conservation laws and nonlinear stability theorems for 2-D and geophysical flows. Weakly nonlinear stability theory and phenomenological theories of turbulence. Not offered 2013-14.
Ae 234
Hypersonic Aerodynamics
9 units (3-0-6)
|
first term
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent, AM 125 abc, or instructor's permission.
An advanced course dealing with aerodynamic problems of flight at hypersonic speeds. Topics are selected from hypersonic small-disturbance theory, blunt-body theory, boundary layers and shock waves in real gases, heat and mass transfer, testing facilities and experiment. Not offered 2013-14.
Ae 235
Rarefied Gasdynamics
9 units (3-0-6)
|
third term
Molecular description of matter; distribution functions; discrete-velocity gases. Kinetic theory: free-path theory, internal degrees of freedom. Boltzmann equation: BBGKY hierarchy and closure, H theorem, Euler equations, Chapman-Enskog procedure, free-molecule flows. Collisionless and transitional flows. Direct simulation Monte Carlo methods. Applications.
Instructor:
Pullin
Ae 237 a
Nonsteady Gasdynamics
9 units (3-0-6)
|
second term
Part a: dynamics of shock waves, expansion waves, and related discontinuities in gases. Adiabatic phase-transformation waves. Interaction of waves in one- and two-dimensional flows. Boundary layers and shock structure. Applications and shock tube techniques. Part b: shock and detonation waves in solids and liquids. Equations of state for hydrodynamic computations in solids, liquids, and explosive reaction products. CJ and ZND models of detonation in solids and liquids. Propagation of shock waves and initiation of reaction in explosives. Interactions of detonation waves with water and metals.
Instructor:
Shepherd
Ae 239 ab
Turbulence
9 units (3-0-6)
|
second, third terms
Prerequisites: Ae/APh/CE/ME 101 abc; AM 125 abc or ACM 101.
Reynolds- averaged equations and the problem of closure. Statistical description of turbulence. Homogeneous isotropic turbulence and structure of fine scales. Turbulent shear flows. Physical and spectral models. Subgridscale modeling. Turbulent mixing. Structure of low and high Reynolds number wall turbulence. Not offered 2013-14.
Ae 240
Special Topics in Fluid Mechanics
Units to be arranged
|
first, second, third terms
Subject matter changes depending upon staff and student interest. (1) Educational exchange at Ecole Polytechnique. Students participating in the Ecole Polytechnique educational exchange must register for 36 units while they are on detached duty at Ecole Polytechnique. For further information refer to the graduate option information for Aerospace.
Instructor:
McKeon
Ae 241
Special Topics in Experimental Fluid and Solid Mechanics
Prerequisites: Ae/APh 104 or equivalent or instructor's permission. Units to be arranged; first, second, third terms.
Subject matter changes depending upon staff and student interest. (1) Bioinspired Engineering, third term, units 3-3-2.
Instructor:
Ghari
Ae/BE 242
Biological Flows: Propulsion
9 units (3-0-6)
|
second term
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent or ChE 103 a.
Physical principles of unsteady fluid momentum transport: equations of motion, dimensional analysis, conservation laws. Unsteady vortex dynamics: vorticity generation and dynamics, vortex dipoles/rings, wake structure in unsteady flows. Life in moving fluids: unsteady drag, added-mass effects, virtual buoyancy, bounding and schooling, wake capture. Thrust generation by flapping, undulating, rowing, jetting. Low Reynolds number propulsion. Bioinspired design of propulsion devices. Not offered 2013-14.
MedE/BE/Ae 243
Biological Flows: Transport and Circulatory Systems
9 units (3-0-6)
|
third term
Prerequisites: Ae/APh/CE/ME 101 abc or equivalent or ChE 103 a.
Internal flows: steady and pulsatile blood flow in compliant vessels, internal flows in organisms. Fluid dynamics of the human circulatory system: heart, veins, and arteries (microcirculation). Mass and momentum transport across membranes and endothelial layers. Fluid mechanics of the respiratory system. Renal circulation and circulatory system. Biological pumps. MedE 291 Research in Medical Engineering. Units to be arranged. Qualified graduate students are advised in medical engineering research, with the arrangement of MedE staff. Offered 2013-14.
Instructor:
Gharib
Ae 244
Mechanics of Nanomaterials
9 units (3-0-6)
|
second term
Basics of the mechanics of nanomaterials, including the physical and chemical synthesis/processing techniques for creating nanostructures and their relation with mechanical and other structural properties.Overview of the properties of various types of nanomaterials including nanostructured metals/ceramics/composites, nanowires, carbon nanotubes, quantum dots, nanopatterns, self-assembled colloidal crystals, magnetic nanomaterials, and biorelated nanomaterials. Innovative experimental methods and microstructural characterization developed for studying the mechanics at the nanoscale will be described. Recent advances in the application of nanomaterials in engineering systems and patent-related aspects of nanomaterials will also be covered. Open to undergraduates with instructor's permission. Not offered 2013-14.
Ae/CDS/ME 251 ab
Closed Loop Flow Control
9 units
|
(3-0-6 a, 1-6-1- b)
Prerequisites: ACM 100abc, Ae/APh/CE/ME 101abc or equivalent.
This course seeks to introduce students to recent developments in theoretical and practical aspects of applying control to flow phenomena and fluid systems. Lecture topics in the second term drawn from: the objectives of flow control; a review of relevant concepts from classical and modern control theory; high-fidelity and reduced-order modeling; principles and design of actuators and sensors. Third term: laboratory work in open- and closed-loop control of boundary layers, turbulence, aerodynamic forces, bluff body drag, combustion oscillations and flow-acoustic oscillations. Not offered 2013-14.
ME/Ge/Ae 266 ab
Dynamic Fracture and Frictional Faulting
9 units (3-0-6)
|
second term
Prerequisites: Ae/AM/CE/ME 102 abc or Ae/Ge/ME 160 ab or instructor's permission.
Introduction to elastodynamics and waves in solids. Dynamic fracture theory, energy concepts, cohesive zone models. Friction laws, nucleation of frictional instabilities, dynamic rupture of frictional interfaces. Radiation from moving cracks. Thermal effects during dynamic fracture and faulting. Crack branching and faulting along nonplanar interfaces. Related dynamic phenomena, such as adiabatic shear localization. Applications to engineering phenomena and physics and mechanics of earthquakes. Not offered 2013-14.
Published Date:
July 28, 2022